Products Description
S235J0W Atmospheric Corrosion Resistance Steel Plate has the material designation 1.8958, conforms to the EN 10025-5 standard, and belongs to the category of structural steels with improved atmospheric corrosion resistance.
It is commonly referred to as weathering steel or atmospheric corrosion-resistant steel.
A key characteristic of this steel is that when exposed to the atmosphere, its surface gradually forms a dense, stable protective oxide layer (rust layer).
This layer significantly slows subsequent corrosion, making its corrosion resistance far superior to ordinary carbon steel.
Regarding mechanical properties, S235J0W exhibits a minimum yield strength of 235 MPa (applicable to plates ≤16 mm thick), with tensile strength typically ranging from 360–510 MPa and elongation not less than 26%.
These metrics ensure a favorable balance between load-bearing capacity and ductility, making it suitable for diverse welding and structural fabrication applications.

For impact performance, the "J0" designation indicates a Charpy V-notch impact absorption energy of no less than 27 J at 0°C, ensuring sufficient toughness and safety in low-temperature environments.
Regarding atmospheric corrosion resistance, S235J0W Corten Steel Plate exhibits a corrosion rate significantly lower than ordinary carbon steel. Under industrial atmospheric or marine climates, its average annual corrosion depth typically ranges from 0.01–0.03 mm/year, whereas ordinary carbon steel often exceeds 0.1 mm/year.
This property enables S235J0W Weatherig Steel Plate to significantly reduce maintenance frequency during long-term outdoor exposure, extending its service life by 3–5 times compared to conventional carbon steel.
Consequently, S235J0W Hot Rolled Corten Steel Plate is extensively used in bridges, building curtain walls, railway vehicles, containers, towers, and various welded structures. It is particularly suitable for engineering applications in rainy, windy, and saline environments.
Specification
|
Gangsteel Grade : |
S235J0W Hot Rolled Weathering Steel Plate |
|
Specification: |
Thickness 8mm-300mm, Width: 1500-4020mm, Length: 3000-27000mm |
|
Standard: |
EN10025-5 Technical delivery conditions for general structural steels |
|
Approval By Third Party |
ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE |
|
Classification: |
hot rolled or normalizing structural steels |
Chemical composition % of the Product analysis of grade S235J0W
|
C |
Si |
Mn |
Cu |
P |
S |
Cr |
N |
|
0.16 |
0.45 |
0.15-0.70 |
0.20-0.60 |
0.040 |
0.040 |
0.35-0.85 |
0.010 |
Mechanical properties of grade S235J0W
|
Temperature |
-20 |
-10 |
0 |
20 |
|
Notch impact test. Min. absorbed energy J |
|
|
27 |
|
|
Nominal thickness (mm) |
to 16 |
16 - 40 |
40 - 63 |
63 - 80 |
80 - 100 |
100 - 150 |
|
ReH - Minimum yield strength (MPa) |
235 |
225 |
215 |
215 |
215 |
195 |
|
Nominal thickness (mm) |
to 3 |
3 - 100
|
100-150 |
|
Rm -Tensile strength (MPa) |
360-510 |
360-510 |
350-500 |
|
Nominal thickness (mm) |
≥1.5<2 |
≥2﹤2.5 |
≥2.5<3
|
≥3<40 |
≥40﹤63 |
≥6﹤100 |
≥100﹤150 |
|
A - Minimum elongation Lo = 5,65 √ So (%) Longitudinal |
19 |
20 |
21 |
26 |
25 |
24 |
22 |
Equivalent grades of grade S235J0W
|
UNI EU 155 |
France NFA35502 |
Germany WBL 087 |
U.K. BS 4360 |
Canada CSA G4021 |
USA ASTM |
|
Fe360 CK1 |
E 24W3 |
WSt 37-2 |
|
|
|
S235J0W steel main application

S235J0W High Strength Atmospheric Corrosion Resistance Steel Plate is used for shipping containers,steel bridges,vessels and tanks for preventing atmospheric corrosion usage.
Contact now to get S235J0W Quote
Hot Tags: s235j0w atmospheric corrosion resistance steel plate, China s235j0w atmospheric corrosion resistance steel plate manufacturers, suppliers, Laser Cut Corten Steel Sheet, Acid Resistant Steel Plate, cutting corten steel, Sea Water Corrosion Resistant Corten Plate, Cold Rolled Corten Sheet, Corten Steel Laser Cutting










