Are there any other processes that can improve the mechanical properties of SPA-H weathering steel?

Jan 19, 2026 Leave a message

Beyond cold rolling, several thermal and mechanical processes can tailor or enhance the mechanical properties of SPA-H weathering steel (strength, hardness, ductility, toughness) to meet specific application requirements, without compromising its core weathering corrosion resistance. Below are the most common and effective processes:
 

1. Normalizing Heat Treatment

 

Process principle: Heat SPA-H steel to 880–920°C, hold it for a specific time (based on thickness) to achieve uniform austenitization, then air-cool it to room temperature.

Property improvements: Refines the steel's grain structure, balances strength and ductility, and reduces internal residual stresses from rolling or welding. It also enhances toughness, making SPA-H more resistant to impact damage (critical for structural components like bridge railings).

Ideal for: Thick SPA-H plates (>25 mm) or welded components that have developed hard, brittle microstructures in the heat-affected zone (HAZ).

info-229-215

2. Tempering Heat Treatment

 

Process principle: Typically performed after normalizing or welding-heat the steel to 550–650°C, hold, then cool slowly. Avoid temperatures above 700°C to prevent grain coarsening.

Property improvements: Reduces hardness and brittleness, improves ductility and toughness, and relieves residual stresses. It slightly lowers tensile strength but significantly enhances the steel's formability for bending or shaping.

Ideal for: Critical structural welds or cold-formed SPA-H parts that have become work-hardened and prone to cracking.

info-231-219

3. Shot Peening

 

Process principle: A surface mechanical treatment that bombards the steel surface with high-velocity metal shots, creating a layer of compressive residual stress on the surface.

Property improvements: Enhances surface hardness and fatigue resistance-critical for SPA-H components subjected to cyclic loads (e.g., conveyor system parts, wind turbine brackets). It also does not affect the steel's patina formation ability.

Ideal for: Thin to medium SPA-H gauges (1.6–25 mm) used in dynamic load applications.

info-233-223

4. Controlled Rolling (Thermo-Mechanical Processing)

 

Process principle: Integrates controlled heating and rolling during the steel's production stage-roll the steel at a temperature just below the austenite recrystallization temperature, then cool it at a controlled rate.

Property improvements: Produces a fine-grained microstructure that simultaneously increases strength (yield strength can rise by 10–15%) and toughness. It also improves the steel's uniformity across its thickness.

Ideal for: Mill-scale production of SPA-H plates/sheets for high-performance structural applications (e.g., industrial plant frames, heavy-duty storage silos).

info-224-220

5. Stress Relief Annealing

 

Process principle: A low-temperature heat treatment (500–600°C) to relieve residual stresses without altering the steel's core microstructure.

Property improvements: Eliminates stresses from cold forming, welding, or machining, preventing warping, cracking, or dimensional instability over time. It does not significantly change strength or hardness but improves the steel's long-term structural stability.

Ideal for: Precision components like decorative sign panels, architectural cladding, or machined industrial parts.

info-231-221