The stable protective patina of weathering steel is a dense double-layer structure composed of iron oxides and alloy element compounds (Cu, Cr, Ni). Chloride ions (Cl⁻) in salt spray have strong permeability and can penetrate the micro-pores of the patina and react with the iron substrate inside, forming soluble iron chloride.
The soluble iron chloride will accelerate the electrochemical corrosion reaction of the steel surface, destroy the dense structure of the patina from the inside, and make the originally protective patina loose and brittle. In severe cases, the patina will peel off in pieces, exposing the fresh steel substrate to continuous corrosion.
The salt spray environment also increases the humidity of the steel surface and prolongs the wetting time, which further intensifies the corrosion process. In coastal salt spray areas with high chloride ion concentrations, the corrosion rate of weathering steel can be 3–5 times higher than that in rural or urban environments.

Mild salt spray environment (e.g., areas 1–3 km away from the coast, with low chloride ion content in the air): The patina can maintain basic stability for a short period (1–3 years), but localized pitting corrosion will gradually appear. Regular maintenance (e.g., cleaning surface salt deposits, applying breathable protective paint) is required to extend its service life.
Moderate to severe salt spray environment (e.g., coastal areas within 1 km, offshore platforms, or areas with frequent salt fog): The patina will lose its protective effect within a few months. The surface of the steel plate will appear uneven rust spots, and the corrosion will penetrate into the substrate, leading to a decrease in the thickness and mechanical properties of the steel plate.

Surface protection treatment: Apply weathering steel-specific breathable fluorocarbon paint or anti-salt spray rust stabilizer on the surface of the patina, which can block the contact between chloride ions and the patina while maintaining the breathability of the steel surface.
Structural design optimization: Avoid designing horizontal surfaces that are easy to accumulate salt water; set drainage holes on the steel plate to prevent salt water from stagnating; increase the thickness of the steel plate to reserve corrosion allowance.
Regular maintenance: Clean the surface of the steel plate every 6–12 months to remove salt deposits and loose rust; repair the damaged patina or paint film in a timely manner.









