Corten weathering steel plate SPA-H is widely recognized for its outstanding resistance to atmospheric corrosion, oxidation, and environmental degradation, and it is manufactured in accordance with JIS G3125 Japanese Industrial Standard.
This steel grade features a low carbon design, while its strength and corrosion resistance are significantly enhanced through the controlled addition of alloying elements.

As a result, SPA-H steel plate offers an excellent balance between durability, mechanical performance, and long-term stability.
Due to these characteristics, SPA-H weathering steel plate is especially suitable for long-term outdoor exposure, making it an ideal material for applications such as bridges, shipping containers, railway vehicles, architectural facades, and other structural engineering projects.
Atmospheric Corrosion Resistance
The most notable advantage of SPA-H weathering steel plate is its exceptional resistance to atmospheric corrosion. When exposed to natural environmental conditions such as wind, rain, humidity, and temperature fluctuations, the steel surface gradually develops a dense and adherent oxide patina.
This protective rust layer effectively blocks further ingress of oxygen and moisture, slowing down the corrosion process. Even in demanding environments-such as industrial zones, coastal areas with salt fog, and regions affected by acid rain-the patina remains stable, significantly extending the service life of the structure.
Chemical Compositionion
The superior weathering performance of SPA-H steel plate is achieved through a carefully optimized chemical composition. The carbon content is strictly controlled below 0.12%, manganese does not exceed 0.60%, silicon is maintained within 0.25–0.75%, and phosphorus ranges between 0.007–0.15%, while sulfur is limited to ≤0.035%.
In addition, SPA-H contains copper (0.25–0.55%), chromium (0.30–1.25%), and a small amount of nickel (≤0.65%). These alloying elements work together to accelerate the formation of a protective oxide layer, giving SPA-H a clear performance advantage in urban, marine, and industrial atmospheres.
Mechanical Properties

In addition to its excellent corrosion resistance, SPA-H high-strength weathering steel plate also provides reliable mechanical performance.
For plates with a thickness of ≤6 mm, the yield strength is not less than 355 MPa, tensile strength is ≥490 MPa, elongation reaches ≥22%, and bending performance meets 180° with an inside bend radius of 0.5T.
For plates thicker than 6 mm, the yield strength and tensile strength remain the same, while elongation is ≥15%, with a 180° bending angle and an inside radius of 1.5T.
This excellent combination of strength, ductility, and toughness ensures stable performance in load-bearing structures and forming processes.
Production and Processing Advantages
SPA-H weathering steel plates are produced using converter steelmaking with precise endpoint control, which reduces oxygen content in the molten steel, improves alloy element recovery, and ensures consistent chemical composition.
During hot rolling, a hot coil box process is applied to maintain uniform temperature throughout the coil. An advanced descaling system guarantees a smooth surface finish, free from scale embedding or surface cracking.
Thanks to strict thickness and width control, dimensional accuracy fully complies with technical standards, achieving an extremely high yield rate and stable product quality.
Applications
Based on customer feedback, SPA-H weathering steel plates show excellent performance in container manufacturing, featuring minimal thickness deviation, flat plate shape, high surface quality, and outstanding formability.

During forming and processing, cracking and surface peeling are rarely observed, fully satisfying the technical requirements of container production.
In addition, SPA-H is extensively applied in bridges, railway vehicles, offshore platforms, oil and gas equipment, and architectural curtain wall systems.
With its optimized alloy design, superior mechanical properties, and advanced manufacturing process, SPA-H Corten weathering steel plate represents a high-value material solution that combines long service life, structural reliability, and distinctive aesthetic appeal.

What is spa H material?
As Spa-h steel coil material is a weathering steel, it forms the protective patina on the surface which gives it a rustic appearance. The chemical composition of the JIS g3125 spa-h strip includes carbon, silicon, manganese, phosphorus, sulphur, copper, chromium and nickel.
What is spa-h steel equivalent?
Worldwide equivalents of grade SPA-H (Japan: JIS ) Cross reference table for Steel SPA-H (JIS ) and its European equivalent S355J0WP (1.8945)
What is the chemical composition of SPA-H Steel?
The main elements include carbon (C), manganese (Mn), silicon (Si), chromium (Cr), and copper (Cu). Their contents are strictly controlled to ensure mechanical properties and weather resistance.
How to maintain SPA-H Steel?
SPA-H steel requires minimal maintenance. A stable rust layer protects the steel. Regular cleaning to remove dust or debris and avoiding prolonged water exposure is sufficient.
Can SPA-H Steel be welded?
Yes. Low-hydrogen arc welding or gas shielded welding is recommended. Preheating and slow cooling after welding help prevent cracking.
| CORTEN | Corten A | Corten B | ||
| ASTM A588/A588M | A588 Grade A | A588 Grade B | A588 Grade C | A588 Grade K |
| ASME SA588/SA588M | SA588 Grade A | SA588 Grade B | SA588 Grade C | SA588 Grade K |
| EN 10025-5 | S235J0W | S235J2W | S355J0WP | S355J2WP |
| S355J0W | S355J2W | S355K2W | ||
| EN 10155 | S235J0W | S235J2W | ||
| S355J0WP | S355J2WP | |||
| S355J0W | S355J2G1W | S355J2G2W | S355K2G1W | |
| S355K2G2W | ||||
| TB/T 1979 | 08CuPVRE | 09CuPTiRE-A | 09CuPTiRE-B | 09CuPCrNi-A |
| 09CuPCrNi-B | 05CuPCrNi | |||
| GB/T 4171 | Q295GNH | Q345GNH | Q265GNH | Q310GNH |
| Q235NH | Q295NH | Q355NH | Q415NH | |
| Q460NH | Q500NH | Q550NH | ||
| JIS G 3114 | SMA400AW | SMA400BW | SMA400CW | |
| SMA400AP | SMA400BP | SMA400CP | ||
| SMA490AW | SMA490BW | SMA490CW | ||
| SMA490AP | SMA490BP | SMA490CP | ||
| SMA570W | SMA570P | |||
| JIS G3125 | SPA-H | SPA-C |







