The impact strength (also referred to as Charpy V-notch toughness, CVN) of ASTM A588 Gr.B weathering steel consistently increases as temperature rises and gradually decreases as temperature falls, following the classic ductile-to-brittle transition behavior inherent to high-strength low-alloy (HSLA) structural steels. This relationship is critical for determining the material's suitability in different temperature environments, as impact strength directly reflects the steel's ability to absorb energy and resist brittle fracture under sudden loading or impact.
At low temperatures (below room temperature, particularly below 0 °C)
As temperature drops, the microstructure of ASTM A588 Gr.B undergoes subtle changes that reduce its ductility and energy absorption capacity. At sub-zero temperatures-such as −23 °C (the standard minimum test temperature for this grade) or lower (down to −40 °C for many commercial variants)-the steel transitions from a ductile state to a more brittle one. This means it can no longer deform plastically to absorb impact energy; instead, it is more likely to fracture suddenly without significant prior deformation. Consequently, impact strength decreases noticeably in cold conditions, though ASTM A588 Gr.B is specifically engineered to maintain a minimum impact toughness of 21 J at −23 °C (for thicknesses ≥ 12.5 mm) to ensure structural safety in most cold-weather applications. Even so, prolonged exposure to extremely low temperatures (well below −40 °C) can further reduce impact strength, increasing the risk of brittle failure in load-bearing structures.

At room temperature (20–25 °C)
At ambient temperatures, ASTM A588 Gr.B exhibits balanced ductility and toughness, with impact strength reaching moderate to high levels (typically 40–80 J, depending on manufacturing processes and thickness). This is the material's "optimal" range for impact performance, as it can absorb sufficient energy during impact to resist fracture while maintaining the high strength required for structural applications. The steel's microstructure-primarily fine-grained ferrite and pearlite-supports good energy absorption here, making it reliable for most outdoor and industrial structural uses.
At moderately high temperatures (above room temperature up to 200–250 °C)
As temperature rises above room temperature, the impact strength of ASTM A588 Gr.B continues to increase steadily. The higher temperature enhances the steel's ductility by reducing internal friction and allowing more plastic deformation before fracture. At these temperatures, the material can absorb even more energy during impact, making it less susceptible to brittle failure. This improvement in impact strength is gradual and consistent within this range, and the steel retains its structural integrity while becoming more resilient to sudden loads or impacts.

Key notes on transition behavior
ASTM A588 Gr.B has a well-defined ductile-to-brittle transition temperature (DBTT)-the temperature at which impact strength drops sharply from ductile to brittle behavior. For most commercial grades of A588 Gr.B, the DBTT falls between −30 °C and −40 °C, meaning impact strength remains sufficient for structural safety above this range but decreases rapidly below it. Additionally, factors like thickness (thicker plates may have a slightly higher DBTT due to coarser grain structures) and manufacturing processes (normalized vs. as-rolled) can slightly influence the exact relationship between temperature and impact strength, but the overall trend-impact strength increases with rising temperature and decreases with falling temperature-remains consistent.
