Weathering steel tree grates are tree pit coverings made of atmospheric corrosion-resistant steel. They combine functionality (permeability for water and air, root protection) with aesthetic value, and are widely used in municipal greening and landscaping projects.
Weathering Steel Tree Grates Material Characteristics:
1. Corrosion Resistance: A dense rust layer forms on the surface, extending the lifespan by 3-5 times compared to ordinary steel.
2. Structural Strength: 2-5mm thick steel plates can bear 1-2 tons, meeting the requirements of vehicle traffic.
3. Maintenance Costs: No painting or maintenance required, reducing total lifespan costs by 30%.
installation guide：
Preparation🌳
First, clean up any debris, gravel, or other contaminants around the tree pit to ensure the ground is level. This is crucial; an uneven surface will hinder the grate's installation.
Marking the Installation Location📐
Next, mark the installation location on the edge of the tree pit using chalk or a marker, according to the grate's dimensions. This ensures the grate is aligned with the pit's edge and is level after installation.
Placing the Tree Grate🛠️
Then, carefully place the Corten steel tree grate in the marked position. If you require a secure fastener, use expansion bolts or similar fasteners. This step is critical; improper securing can shorten the grate's lifespan.
Installation Tips💡
Handle the grate gently during installation to avoid scratching it.
After installation, conduct a thorough inspection to ensure the grate is securely installed and free of any loose parts.
